User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 79 of 152 March 2, 2011
Hint: Login to the remote PTP Master or PMP sector controller, uncheck ( ) the
Radio Enable setting, and click Test. The radio will be disabled and the wireless link
will be lost. The radio is automatically re-enabled after approximately 5 minutes.
2. Click on Spectrum Sweep in the main menu. It is recommended to scan using the
smallest available channel with a step size of 1/2 the channel size (e.g., use a 5 MHz
step size when scanning for a free 10 MHz channel).
12. For example:
13. Start/Stop = 5735 / 5830
14. Step [MHz] = 5
15. No. of Acquisitions = 10
3. Click the Start button to begin the sweep.
16. When the sweep has completed, review the results. A channel may be
considered 'available' when free of interference for at least +/- one-half the
channel bandwidth from the desired center frequency. For example, a 20 MHz
channel should have no interference detected for at least +/- 10 MHz from the
candidate channel.
Fig. 49: Web - Spectrum Sweep Example Results
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]