User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 74 of 152 March 2, 2011
SNMP Trap Editor Screen
Click the Add button in the SNMP Traps Management section of the SNMP
Configuration screen to modify the associated SNMP trap settings.
Fig. 45: Web - SNMP Traps Management - SNMP V2/V3 Editor Screens
Index: Display the table position index for this entry. Position 0 is the first entry.
IP Address: Enter the IP address (IPv4) associated with this SNMP trap alarm.
Port: Enter the destination port address associated with this SNMP trap alarm.
Community Name: (SNMP V2) Enter the SNMP community name associated with
this SNMP trap alarm.
User Name: (SNMP V3) Enter the user account associated with this SNMP trap
alarm.
Change Trap: Click to save changes made in this editing screen. To save changes
permanently you must also click the Save Comm button in the SNMP Configuration
screen.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]