User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 70 of 152 March 2, 2011
Table 8: PTP & PMP - Required FreeRadius Files
Action
File
File Entry
Define an
AN-80i client.
clients.conf
client 192.168.0.0/16 {secret = secret shortname = AN80i }
Add an account
of type: admin
users.conf
admuser Auth-Type := Local, User-Password == "abc"
Service-Type = Administrative-User
Add an account
of type:user
users.conf
usrjoe Auth-Type := Local, User-Password == "pass"
Service-Type = NAS-Prompt-User
Reject an
account.
users.conf
lameuser Auth-Type := Reject
Reply-Message = "Account has been disabled."
5.3.2 SNMP Configuration Screen
When SNMP is enabled on the system configuration screen, click Configure SNMP
(blue text) adjacent to this selection to view and edit the SNMP settings. The hyperlink
appears only
if the SNMP Enable box is checked.
The SNMP protocol allows an application to interrogate information and change enabled
fields within the AN-80i MIB (Management Information Base). Each section of this
screen is described in detail in the following sections.
Fig. 39: Web - SNMP Configuration Screen
SNMP Communities Management
Use this section of the screen to manage the SNMP community settings. The AN-80i
supports up to eight separate community strings. Community strings should be
considered to be passwords. Each community name will have specific access rights
(read/write). The 'public' and 'private' community strings are the default access values
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]