User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 66 of 152 March 2, 2011
5.2 Users Management Screen
Click Users Management in the left hand menu to display the System Password screen.
This screen allows the operator to modify the system passwords.
Fig. 37: Web - System Password Screen
The AN-80i supports administrator and user accounts. See 7.5: Factory Default Settings
on page 116
for the factory default login values. See Table 7: PTP & PMP - User Access on page 68
for permissions associated with each group.
Administrators can use this command to add new user accounts. Usernames may be 1
to 19 alpha-numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Passwords may be 8 to 15 alpha-numeric characters including a-z, A-Z, 0-9, dash (-),
and underscore (_).
Important: There must always be at least one 'administrator' account active on
the AN-80i. You can not
manage the AN-80i if all accounts are 'user'.
When user authentication is set to RADIUS Only or Local + RADIUS, the authorization
data is retrieved from the RADIUS server at ten minute intervals. For example, if a user's
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]