User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 61 of 152 March 2, 2011
4.10.2 Connection Configuration Screen
Click New Connection in the main menu to display the Connection Configuration screen
and add a new connection (Link + Group).
Use the Links browse screen (refer to 4.8: PMP Link Screens on page 51) to
view/modify existing Connections. Click Links in the main menu to locate the desired
link and then click Expand to display the Connections browse screen. Click Config to
display the Connection Configuration screen.
Use the Groups browse screen (refer to 4.9 PMP Group Screens on page 56) to
view/modify existing Connections. Click Groups in the main menu to locate the desired
Connection and then click Expand to display the Connections brows e screen. Click
Config to display the Connection Configuration screen.
Fig. 32: Web - PMP - Connection Configuration Screen
Wireless Connection
Connection Name: Enter a unique name to identify this group. This identifier is
displayed on configuration and statistics screens. The name may contain up to fifteen
(15) alpha-numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Connection ID: (Read only) A unique ID is automatically generated when a Connection
is created.
Connection tagging mode: Select the classification mode for this Connection.
Tagged: Select tagged to associate a unique VID with this Connection.
Pass-through: Classify all packets that do not
have a VLAN ID, or where the
outermost VLAN ID tag does not
match the VLAN ID for any tagged Connection.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]