User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 57 of 152 March 2, 2011
4.9.2 Group Configuration
Click New Group in the main menu to display the Group Configuration screen and
define a new Group. Use the Group browse screen (refer to 4.9 PMP Group Screens on
page 56) to view/modify existing Groups. Click Groups in the main menu to locate the
desired Group and then click Config to display the Group Configuration screen.
Fig. 28: Web - PMP - Group Configuration Screen
Wireless Group
Group Name: Enter a unique name to identify this group. This identifier is displayed on
configuration and statistics screens. The name may contain up to fifteen (15) alpha-
numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Group ID: (Read only) A unique ID is automatically generated when a Group is created.
Group Tagging Mode: Select the classification mode for this group.
Classified (matching) packets are forwarded to all members of this group.
Tagged: Classify only packets that have the VLAN ID entered in the Group VLAN ID
field for this Group.
Pass-through: Classify all packets that do not
have a VLAN ID, or where the
outermost VLAN ID tag does not
match the VLAN ID for any tagged Group.
Group VLAN ID: Enter the VID associated with this Group definition.
This field is used only when 'Tagged' is selected in the Group Tagging Mode field.
Default Priority: Enter the default 802.1p priority setting (0-7).
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]