User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 54 of 152 March 2, 2011
4.8.3 Link Statistics
The Link Statistics screen is accessible only from the Links browse screen (refer to 4.8:
PMP Link Screens on page 51). Click Links in the main menu to locate the desired link
and then click Status to display the link statistics screen.
Fig. 26: Web - PMP - Link Statistics Screen
General
Link Name: User-assigned name for this link.
Link ID: Unique number identifying this link.
Peer MAC: MAC Address of the subscriber.
Active: Indicates if wireless link is operational (Active=YES).
Link Up Time: Total time the wireless link has been operational.
Link lost Count: Number of times link has been out of service.
Status Code: Code indicating the condition of the AN-80i system. Status indications are
specific for PMP and PTP operation.
Configured Connections: The number of Connections configured on this link.
Wireless
The following statistics are displayed for both uplink and downlink.
Burst Rate: The current uncoded burst rate for the link.
RSSI: Received signal strength indicator.
SINADR: Average signal to interference, noise, and distortion ratio.
Lost Frames: Number of frames lost.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]