User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 52 of 152 March 2, 2011
4.8.2 Link Configuration
Use this screen to display and modify existing link settings. Access existing links through
the Links Browse screen or click New Links in the main menu to add a new link.
Fig. 25: Web - PMP - Link Configuration Screen
Link Name: Enter a unique name to identify this wireless link. This identifier is displayed
on configuration and statistics screens. The name may contain up to fifteen (15)
alphanumeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Link ID: (Read only) A unique ID is automatically generated when a Link is created.
Peer MAC: MAC address of the subscriber station. The sector controller will establish a
wireless link only if the subscriber MAC address is recorded in this field.
Note: This behavior is different in PTP mode.
Max. DL Burst Rate: Set the desired maximum downlink burst rate for unicast traffic
from the sector controller to the subscriber. This setting determines the maximum
modulation/coding setting for this link.
Max. UL Burst Rate: Set the desired maximum uplink burst rate for unicast traffic from
the subscriber to the sector controller. This setting determines the maximum
modulation/coding setting for this link.
Min. DL Burst Rate: Set the minimum desired downlink burst rate for unicast traffic from
the sector controller to the subscriber when adaptive modulation is enabled. If the DL
UBR selected by adaptive modulation does not support the current setting, the DL Burst
Rate for this link is displayed in red on the Link Status Summary page.
The Min. Burst Rate setting should be calculated using the PMP configuration tool.
Min UL Burst Rate: Set the minimum desired uplink burst rate for unicast traffic from the
subscriber to the sector controller when adaptive modulation is enabled. If the UL UBR
selected by adaptive modulation does not support the current setting, the UL Burst Rate
for this link is displayed in red on the Link Status Summary page.
Important
: Burst rate settings affect operation of the entire sector and should be
verified using the latest version of the Redline PMP configuration tool.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]