User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 47 of 152 March 2, 2011
4.6 PMP Links Summary Screen
Click Links Summary in the main menu to view system, Ethernet statistics, and wireless
interface statistics.
The Link Status Summary page displays information about all wireless links. This
information includes: ID, name, status, and uplink/downlink statistics for SINADR, RSSI,
burst rate, total blocks transmitted, and blocks retransmitted.
This table also provides direct links to the link configuration and statistics pages.
Fig. 21: Web - PMP Links Summary Screen
ID: Unique ID assigned to this link.
Name: Click on the Name field e.g., Link-1) to display the associated configuration page,
Status: Click on the Status field (e.g., Up) to display wireless and Ethernet statistics for
this link.
SINADR (dB): Average signal to interference, noise, and distortion ratio.
RSSI (dBm): Received signal strength indicator.
Burst Rate (Mb/s): The current uncoded burst rate for the link. The DL Burst Rate for
this link is displayed in red when adaptive modulation is enabled and the DL UBR
selected by adaptive modulation does not support the current setting. Refer to section
4.8.2: Link Configuration on page 52.
Blocks Total: Blocks transmitted over the wireless interface.
Blocks Retransmitted: Blocks retransmitted over the wireless interface.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]