User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 41 of 152 March 2, 2011
4 PMP Operation
4.1 PMP General Operation
This section describes only the additional parameters required for configuring PMP
support, and an overview about defining and using VLAN and pass-through groups.
The AN-80i PMP software provides the following main features:
IEEE 802.1Q standard compliance
Multiple TLS transport based on VLAN ID classification
Multiple VLAN Connections per subscriber
QoS provisioning with individual CIR setting per connection
VLAN Groups span subscribers
VLAN tagged management traffic
VLAN trunking with tag insert/delete/re-map
For additional information, see the AN-80i PMP Operation Guide provided on the CD-
ROM, and the Quick Install Guide later in this guide and separately on the CD-ROM.
The deployed AN-80i wireless network can function as a standard wireless bridge (pass-
through mode), as a VLAN-aware wireless switch, or a combination of both.
Fig. 16: Web - PMP - VLAN Tagged Traffic Example
The diagram illustrates a network implementation using two VLAN groups and a pass
through group. The packets tagged with VID=107 are classified as data traffic, and the
packets tagged with VID=108 are classified as voice (VoIP) traffic. Subscribers #1 and
#2 are members of the Data group, while only subscriber #2 is a member of the Voice
Chapter 4
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]