User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 34 of 152 March 2, 2011
Mgmt. Tag Enable: Check this box to enable VLAN tagged management traffic.
Disabled (
): AN-80i unit can be managed using untagged traffic.
Enabled (
): AN-80i unit can be managed only using VLAN traffic tagged with the
value specified in the Mgmt. VID field.
If the Mgmt. Tag feature is to be used, it is strongly
recommended to create and test the
VLAN connectivity before activating the Mgmt Tag Enable function. Otherwise,
management function may become unavailable and the unit may require a long reset to
recover control (refer to page 105). Set appropriate QoS and priority values to ensure
management traffic has adequate priority and bandwidth during system operation.
Important: On all PMP systems, over-the-air management is possible only after
creating a Group for dev
ice management and adding a Connection for each
subscriber. For installation and setup, it is recommended to use Pass Through
settings for this group and each member connection.
Mgmt. VID: Enter the VLAN ID. When Mgmt. Tag Enable is selected, the system
recognizes only management commands with this VLAN ID. Refer to the Mgmt. Tag
Enable field for more information.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]