User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 28 of 152 March 2, 2011
3.3 PTP System Status Screen
Click System Status in the main menu to view all AN-80i interface statistics.
Fig. 12: Web - PTP System Status Screen
3.3.1 General information
System Name: User-assigned system name.
Software Version: Displays the software version in use.
Tx Status: State of the wireless interface (FIPS mode only). The unit performs
continuous self-tests for the RNG, DSA generator, and signature modules. If any of
these tests fails, the transmitter is disabled.
Off - Wireless security has disabled the transmitter.
On - Wireless security has enabled the transmitter.
RF Link Established: State of the wireless link connection.
Yes - Data link has been successfully established with the remote-end unit.
No - Data link has not
been established with the remote-end unit. This may be
caused by mismatched security settings (e.g., link name, Peer MAC, encryption
settings, etc.).
Data Link Established: State of the data link connection.
Yes - RF link has been successfully established with the remote-end unit.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]