User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 140 of 152 March 2, 2011
9.4 FCC & IC Certified Antennas
9.4.1 5.8 GHz Radio: FCC & IC Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 34.6 dBi.
Table 66: Spec. - FCC & IC Certified Antennas: 5.8 GHz PTP Operation
Redline Order #
(Part Number)
Gain
(dBi)
Description
App.
Ave. GUI
Power
Display
(dBm)
Minimum
Conducted
Power
(dBm)
Max
Conducted
Power
(dBm)
A2209MTFW
(48-00071-00)
22
9°, 4.9-5.875 GHz, flat panel
PTP
20
-12.7
26.2
A2804MTFW
(48-00070-00)
28 4.5°, 4.9-5.925 GHz, flat panel PTP 20 -12.7 26.2
A2906PWP
(48-00063-00)
29
6°, 4.900-5.875 GHz, parabolic
PTP 20 -12.7 26.2
A3204PWP
(48-00064-00)
32
4°, 4.900-5.875 GHz, parabolic
PTP 20 -12.7 26.2
A3403RWP
(48-00033-00)
34.6 3.4°, 5.250-5.850 GHz, parabolic PTP 20 -12.7 26.2
Table 67: Spec. - FCC & IC Certified Antennas: 5.8 GHz PMP Operation
Redline Order #
(Part Number)
Gain
(dBi)
Description App. Tx Power
Setting
(dBm)
Tx Peak
Conducted
Power
(dBm)
A12015EAS
(48-00065-00)
15
120°, 4.9-5.9 GHz, sector flat panel
PMP
9
19.4
A36009MMO
(48-00048-01)
9
360°, 5.0 - 6.0 GHz, omni directional
PMP
13
20.3
A6017EAS
(48-00067-00)
17.5
62°, 4.9-5.9 GHz, sector flat panel
PMP
5
14.9
A9016EAS
(48-00066-00)
16.6 90°, 4.9-5.9 GHz, sector flat panel PMP 7 17.2
Antennas not included in these lists or having a gain greater than 34.6 dBi are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms. The RF
output power and selection must be professionally programmed and the equipment must
be installed by the manufacturer or a trained professional installer.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]