User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 104 of 152 March 2, 2011
Table 38: CLI - user
Designate an authentication method and privacy method to be used for SNMP v3
requests. An authentication method must be selected to enable usage of the privacy
method. Only combination SHA authentication + AES privacy is valid in FIPS mode.
username - Account to setup for SNMP v3 authorization.
chgpasswd <user name>
Administrators can change the password of any account. Users can change only their own
password. Users are prompted to enter new password information.
username Account to be modified.
del <username>
Delete a user account.
username Account to be deleted.
print
Display a list of user accounts.
6.1.24 Whoami
Use the whoami command to display the username of the current Telnet session. This
command is not
available when logged in as administrator.
Table 39: CLI - whoami
Display username for this Telnet session.
whoami
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]