User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 103 of 152 March 2, 2011
6.1.22 Upgrade
Use the upgrade command to upload a new software binary file to the AN-80i.
Table 37: CLI - upgrade
Configure SNMP community permissions.
upgrade <ip addr> <file name> <user name> <password>
ip addr IP address of the FTP/TFTP server.
file name Name of the binary file to be uploaded.
user name FTP account name (FTP server only).
password FTP account password (FTP server only).
TFTP: You must specify the TFTP server address and the full name of the binary file (including
.bin extension). The software binary file must
be located in the default directory of the TFTP
server.
FTP: You must specify the FTP server address, account user name, account password, and the
full name of the binary file (including .bin extension). The software binary file must
be located in
the default directory for the specified user account.
6.1.23 User
Use the user command to manage user accounts, passwords, and user Groups. When
in user mode, only the <chgpasswd> field is available, since the user can change only
their own password. The other commands are available only for members of the
administrator Group.
Table 38: CLI - user
Manage the user accounts.
user <add> <attr> <chgpasswd> <del> <print>
add <username> <usertype>
Administrators can use this command to add new user accounts. Usernames may be 1 to
19 alpha-numeric characters including a-z, A-Z, 0-9, dash (-
), and underscore (_),
Passwords may be 8 to 15 alpha-numeric characters including a-z, A-Z, 0-9, dash (-), and
underscore (_). The operator must confirm their own password and a password for the
new account.
The AN-80i supports administrator and user accounts. See 0:
Factory Default Settings on page 116
for the factory default login values. See
Table 7: PTP & PMP - User Access on page 68 for permissions associated with
each group.
username Enter name of new administrator or user account.
usertype Specify the type of account being created.
user User account.
admin Administrator account.
For example,
192.168.25.2(user)# add user2 user
Enter your password: ********
The new user password (8 to 15 characters)
Enter the new user password: ********
Confirm the new user password: ********
attr <username> < none | MD5 | SHA > < none | DES | AES >
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]