Specifications

sweep, the higher the received power level is. It was observed that small aiming differences did
not result in a significant change in signal quality since the beam pattern of the antennas is
reasonable flat near zero degrees.
Fig. 3.7 System Status Page. The system status page of the Redline web interface displays information such as
Received Signal Strength (RSSI), Signal to Noise and Distortion Ratio (SINADR), and packet retransmission data.
Fig. 3.8 A typical output graph from RF Monitor. This data, along with the measured throughput can be used to
plot throughput vs. SINADR. The lighter line on the SINADR plot is the transmit power.
18