User manual

& User
AN-80i
Manual
70-00072-01-08b Proprietary Redline Communications © 2009 Page 94 of 128 June 4, 2009
5.2.18 Show
Use the show command to display system statistics.
show <Enter> Change to 'show' mode.
show [field] <Enter> Display values for the selected parameter.
Table 31: CLI - show
PTP PMP Description
√
Display PTP system parameters and statistics.
show <config> <files> <log> <snmp> <stats>
config
List system configuration information.
files <run | usr>
List the key and certificate files.
run - Display keys currently in use.
usr - Display the user keys and certificates (default).
log: list the system log
snmp
List the SNMP configuration.
stats
List all statistics.
√ Display PMP system parameters and statistics.
show <config> <files> <log> <snmp> <stats>
config
List system configuration information.
conns <id>
List information for all or specified connection. Default is to
display all connections.
id ID number of specific connection to display.
files <run | usr>
List the key and certificate files.
run - Display keys currently in use.
usr - Display the user keys and certificates (default).
groups
List information for all groups.
idtable
List information for all system IDs.
Example:
192.168.25.2(show)# idtable
ID Name Type Status
--------------------------------------------------------------------------------
4 Link Not Enabled
5 Link Not Enabled
14 Data Group Enabled
15 Voice Group Enabled
24 Conn Not Enabled