User manual

& User
AN-80i
Manual
70-00072-01-08b Proprietary Redline Communications © 2009 Page 80 of 128 June 4, 2009
Table 21: CLI - get
PTP PMP Parameter/Description
dlrpkt: Downlink Rx packets counter.
dltpkt: downlink Tx packets counter.
erxpkt: Number of Ethernet packets received.
erxpktd: Number of Ethernet packets received that were
discarded.
etxpkt: Number of Ethernet packets transmitted.
mac: AN-80i MAC address.
radiotype: Radio type.
rffreq: Current RF frequency setting.
idenable: ID status.
swver: List the downloaded software versions.
sysuptime: Display the time since the last reboot.
txpower: Current Tx power setting.
lactive: Link active status.
ldlblk: Downlink total blocks counter.
ldlbr: Downlink burst rate.
ldldblk: Downlink discarded blocks counter.
ldllfr: Downlink lost frames counter.
ldlrblk: Downlink retransmitted blocks counter.
ldlrssi: Downlink RSSI.
ldlsnr: Downlink SINADR.
llostc: Link lost Connection counter.
lrcon: Number of link registered Connections.
lscode: Link status code.
lulblk: Uplink total blocks counter.
lulbr: Uplink burst rate.
luldblk: Uplink discarded blocks counter.
lullfr: Uplink lost frames counter.
lulrblk: Uplink retransmitted blocks counter.
lulrssi: Uplink RSSI.
lulsnr: Uplink SINADR.
luptime: Link up-time.
regconn: Number of configured Connections.
regstations: Number of configured stations.
rfstatus: Status RF transmitter.
uldpkt: Uplink discarded packets counter.
ulrpkt: Uplink Rx packets counter.
ultpkt: Uplink Tx packets counter.