User manual

& User

AN-80i

Manual

Table 21: CLI - get

PTP PMP Parameter/Description

calcdst: Calculated link distance between units.

datalink: Status of data link led.

0 - Data link is not active -- can not send user data.

1 - Data link is active -- able to send user traffic.

erxpkt: Number of Ethernet packets received.

erxpktd: Number of Ethernet packets received that were

discarded.

etxpkt: Number of Ethernet packets transmitted.

exit: Exit from the current mode.

linkid: A unique Link ID value generated automatically whenever

a wireless link is established.

mac: AN-80i MAC address.

radiotemp: Radio temperature.

radiotype: Radio type.

rffreq: Current RF frequency setting.

rflink: Status of the RF link.

rfstatus: Status RF transmitter.

rssimax: Maximum RSSI.

rssimean: Mean RSSI.

rssimin: Minimum RSSI.

sinadr: Ration of signal to interference + noise.

swver: List the downloaded software versions.

sysuptime: Display the time since the last reboot.

txpower: Current Tx power setting.

ubrate: Current UBR value.

wrxpkt: Number of wireless packets received.

wrxpktd: Number of wireless packets received that were

discarded.

wrxpktr: Number of wireless packets that were retransmitted.

wtxpkt: Number of wireless packets transmitted.

wtxpktd: Number of wireless packets transmitted that were

discarded.

wtxpktr: Number of wireless packets that were retransmitted.

√

Display PMP parameters.

get <parameter>

activeids: Number of active IDs.

activelinks: Number of the active links.

boardtype: Board type.

dldpkt: Downlink discarded packets counter.