User manual

& User
AN-80i
Manual
70-00072-01-08b Proprietary Redline Communications © 2009 Page 77 of 128 June 4, 2009
5.2.3 Clear
Use the clear command to delete all entries in a table.
Table 16: CLI - clear
PTP PMP Parameter/Description
√ Enter this command to delete all IDs from an ID table.
clear <idtable>
idtable - Clear all the IDs
√ Enter this command to delete all IDs from an ID table.
clear <arptable> <freqlist> <log>
arptable - Delete all static entries in the ARP table (see arp).
freqlist - Clear all the frequency list (see 'freq' command)
log - Clear all messages from the log
5.2.4 Del
Use the del command to delete a specific ID or security key/certificate.
Table 17: CLI - del
PTP PMP Parameter/Description
√
del <id>
Remove a group, connection, or link id.
id number <integer>
Unique number for group, connection, or link.
√
del <file>
file <name> <mode>
Remove a file from flash and runtime memory.
<name> File name on server. File name must be one of the
following:
dsa_key_<mac>.pem DSA key used for SSH.
rsa_key_<mac>.pem RSA Key used for SSH.
ssl_cert_<mac>.pem SSL Certificate.
ssl_key_<mac>.pem SSL Key.
usr_wcert_<mac>.der* User wireless certificate.
usr_wkey_<mac>.der* User wireless key.
usr_wacert_<mac>.der* User wireless authority
certificate
The <mac> portion is the MAC address of the board.
For example: dsa_key_00-09-02-00-01-02.pem
<mode> Can be 'usr' or 'factory'. Defaults to 'usr' if mode is not
specified.
*Not used in v3.00 software release.