User manual

& User

AN-80i

Manual

Connection Configuration Screen

Click New Connection in the main menu to display the Connection Configuration screen

and add a new connection (Link + Group).

Use the Links browse screen (see 4.6.5: Links Browse Screen on page 60) to

view/modify existing Connections. Click Links in the menu to locate the desired link and

then click Expand to display the Connections browse screen. Click Config to display the

Connection Configuration screen.

Use the Groups browse screen (see 4.6.7: Groups Browse Screen on page 69) to

view/modify existing Connections. Click Groups in the menu to locate the desired

Connection and then click Expand to display the Connections brows e screen. Click

Config to display the Connection Configuration screen.

Figure 39: Web - PMP - Connection Configuration Screen (Pass through)

Connection Name: Enter a name for this Connection (15 characters max.). The

Connection name is displayed on configuration and statistics screens.

Connection ID: (Read only) A unique Connection ID is generated automatically when a

new link is created. The Connection ID number is required when assigning this

Connection to a Group.

Connection

Tagging Mode: Select the packet processing at the subscriber.

Tagged: Select tagged to associate a unique VID with this

Connection. Further

processing is performed at the sector controller based on the

Group configuration

associated with this

Connection.

Packet received at subscriber Ethernet interface

Each packet with this VID (VLAN ID field) has the matching VLAN tag (outermost

only) removed and is forwarded over the wireless interface to the sector controller.

Packet received at subscriber wireless interface (from sector controller)

A VLAN tag is added (outermost) and set to the VID (

Connection VLAN ID field) for

this

Connection. The packet is forwarded to the subscriber Ethernet port.