User manual

& User
AN-80i
Manual
70-00072-01-08b Proprietary Redline Communications © 2009 Page 62 of 128 June 4, 2009
Link Statistics
The Link Statistics screen is accessible only from the Links browse screen (see 4.6.5:
Links Browse Screen on page 60). Click Links in the menu to locate the desired link and
then click Status to display the link statistics screen.
Figure 36: Web - PMP - Link Statistics Screen
General
Link
Name: User-assigned name for this link.
Link
ID: Unique number identifying this link.
Peer MAC: MAC Address of the subscriber.
Active: Indicates if wireless link is operational (Active=YES).
Link Up Time: Total time the wireless link has been operational.
Link
lost Count: Number of times link has been out of service.
Status Code: Code indicating the condition of the AN-80i system. Status indications are
specific for PMP and PTP operation.
Configured Connections: The number of Connections configured on this link.
Wireless
The following statistics are displayed for both uplink and downlink.
Burst Rate: The current uncoded burst rate for the link.
RSSI: Received signal strength indicator.
SINADR: Average signal to interference, noise, and distortion ratio.