User manual

& User
AN-80i
Manual
70-00072-01-08b Proprietary Redline Communications © 2009 Page 50 of 128 June 4, 2009
Chapter
4
4
4
P
P
M
M
P
P
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
4.1 Introduction
This section describes only the additional parameters required for configuring PMP
support, and an overview about defining and using VLAN and pass-through groups.
The AN-80i PMP software provides the following main features:
- IEEE 802.1Q standard compliance
- VLAN Groups span subscribers
- Multiple VLAN Connections per subscriber
- Multiple TLS transport based on VLAN ID classification
- QoS provisioning with individual CIR setting per connection
- VLAN trunking with tag insert/delete/re-map
- VLAN tagged management traffic
4.2 Additional Information
For additional information, refer to the AN-80i PMP Operation Guide provided on the
CD-ROM, and the Quick Install Guide later in this guide and separately on the CD-ROM.
4.3 PMP Menu
The following menu items are available for configuring and monitoring the PMP
functions. See Table 8: Web - Default System Users on page 45 for the factory default
usernames and passwords. Note that the Browse Groups and all IDs items are available
(blue text) only on the sector controller (PMP SC) menu.
Figure 26: Web - Sector Controller (left) and Subscriber (right) PMP Menu