User manual

& User
AN-80i
Manual
70-00072-01-08b Proprietary Redline Communications © 2009 Page 119 of 128 June 4, 2009
8.4 FCC & IC Certified Antennas
8.4.1 5.8 GHz Radio: FCC & IC Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 34.6 dBi.
Table 63: Spec. - FCC & IC Certified Antennas: 5.8 GHz PTP Operation
Redline Order #
(Part Number)
Gain
(dBi)
Description App. Ave. GUI
Power
Display
(dBm)
Minimum
Conducted
Power
(dBm)
Max
Conducted
Power
(dBm)
A2209MTFW
(48-00071-00)
22 9°, 4.9-5.875 GHz, flat panel PTP 20 -12.7 26.2
A2804MTFW
(48-00070-00)
28 4.5°, 4.9-5.925 GHz, flat panel PTP 20 -12.7 26.2
A2906PWP
(48-00063-00)
29
6°, 4.900-5.875 GHz, parabolic
PTP 20 -12.7 26.2
A3204PWP
(48-00064-00)
32
4°, 4.900-5.875 GHz, parabolic
PTP 20 -12.7 26.2
A3403RWP
(48-00033-00)
34.6 3.4°, 5.250-5.850 GHz, parabolic PTP 20 -12.7 26.2
Table 64: Spec. - FCC & IC Certified Antennas: 5.8 GHz PMP Operation
Redline Order #
(Part Number)
Gain
(dBi)
Description App. Tx Power
Setting
(dBm)
Tx Peak
Conducted
Power
(dBm)
A36009MMO
(48-00048-01)
9 360°, 5.0 - 6.0 GHz, omni directional PMP 13 20.3
A12015EAS
(48-00065-00)
15 120°, 4.9-5.9 GHz, sector flat panel PMP 9 19.4
A9016EAS
(48-00066-00)
16.6 90°, 4.9-5.9 GHz, sector flat panel PMP 7 17.2
A6017EAS
(48-00067-00)
17.5 62°, 4.9-5.9 GHz, sector flat panel PMP 5 14.9
Antennas not included in these lists or having a gain greater than 34.6 dBi are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms. The RF
output power and selection must be professionally programmed and the equipment must
be installed by the manufacturer or a trained professional installer.