Manualshelf

User manual

ManualsBrandsRedline Communications ManualsComputer equipmentAN-50e
101102103104105106107108109110
& User
AN-80i
Manual
70-00072-01-08b Proprietary Redline Communications © 2009 Page 104 of 128 June 4, 2009
6.4.3 PMP Wireless LEDs
Wireless RF Link LED
The wireless RF LED lights solid green under the following conditions:
Sector Controller: When a wireless link is established to one or more subscribers.
Subscriber: When a wireless link is established to the sector controller.
The Wireless Link LED lights solid green when the wireless link is established to one or
more subscribers.
Wireless Link LED Diagnostics
Symptom Possible Problem Solution
Remote system is malfunctioning
or not powered-on.
Verify operation of remote system (sector
controller or subscriber).
The propagation path is blocked. Clear path or re-locate unit.
The transceiver is malfunctioning. Repair/replace unit.
No wireless
link
Antenna is not aligned. Re-align the subscriber antenna.
Wireless Signal LED
The wireless signal LED has the same function as the wireless RF LED.