User`s manual

MegaPlus ES 1020 User’s Manual
Redlake MASD, Inc. Page 5 91000134-001 Rev. A
2. Setup Guide
Before you Begin
Before you begin to setup your MegaPlus
®
ES-1020, please verify that the package you received
contains all the components listed on your packing slip.
Minimum Package Contents
(1) ES-1020 Camera
(1) Mounting Bracket
(1) CD with Camera Control Software & User’s Manual
Optional/Addition Items
(1) Camera Link Cable with MDS-26 connectors
Camera Link cable must be purchased separately.
(1) Strobe/Trigger/Power
Also available for purchase separately is a Strobe/Trigger/Power Accessory cable.
(1) Power Adapter
The ES 1020 requires the use of a Power Adapter with 110/220V Cords which must be purchased
separately through Redlake MASD, Inc.
Lens(es)
Because every application is different with varying focusing and field of vision requirements,
the ES 1020 is not shipped with lenses. They must be purchased separately.
Minimum/Recommended System Requirements
Minimum
• Pentium II, 233 MHz Processor
• At least 32 MB of Ram, 64 MB Recommended
• Frame Grabber Board with Camera Link Adapter (base configuration)
• 20 MB of Hard drive disk space available
Operating System Requirements
Once you have selected your PC, ensuring that it meets the minimum configuration for your
application, make sure that it is running a Microsoft Windows™ operating system, Windows XP,
Windows 2000 Pro (service pack 2) or Windows NT 4.0 or later.