User`s manual

MegaPlus
®
Model ES 1.0
PRECAUTIONS
CAUTION:
A
laser beam focused on the sensor, either directly or by reflection, can cause
permanent damage to the sensor. Any laser powerful enough to produce
localized heating at the surface of the sensor will cause damage, even if the
camera power is off. A sensor damaged by laser light is NOT covered by the
warranty.
NOTE: The ES 1.0 Series Cameras require a minimum of 10 minutes warm up time prior to
operation. Images taken before the camera has warmed up sufficiently may sho
w
artifacts. Waiting until the camera has warmed up will ensure that the camera
performs within specified parameters.
OPERATING TEMPERATURE
The MegaPlus camera is designed to operate satisfactorily in an environment where the ambient
temperature is between 0° and 40°C (32° and 104°F), with no water condensation present.
STORAGE TEMPERATURE
Do not store the equipment in an area where the temperature will drop below –25°C (-13°F) or
exceed 80°C (176°F). Do not allow moisture to condense on the system.
SHIPPING
When shipping, use a carton that protects the camera from shock and moisture, similar to the
carton in which the unit was originally delivered. Do not ship the equipment in a cargo area
where the temperature will drop below -25°C (-13°F) or exceed 80°C (176°F). Do not allow
moisture to condense on the system.
91000064-004 Revision A iii USER’S MANUAL