User`s manual

MegaPlus
®
Model ES 1.0
2.5 Routine Maintenance
There are no user serviceable parts inside the camera. The camera must be returned to the
factory for repair if a malfunction occurs.
The lens and the sensor cover glass should be cleaned according to good photographic
practices.
The camera can be ordered from the factory with an infrared filter installed in the lens mount. If
an infrared filter was not ordered originally, a piece of clear glass will be installed in place of the
filter. The filter or its glass replacement keep the sensor sealed from dust and must be removed
in a clean room environment. A single speck of dust on the sensor is very noticeable because of
the high resolution of the camera.
Clean the exterior of the camera with a soft, dry, lint-free cloth. For stubborn dirt, the cloth may
be dampened with a mild soap solution.
91000064-004 Revision A 2-5 USER’S MANUAL