User`s manual

REDLAKE MASD, INC.
3.4.26 PSC Command
This command enables or disables the continuous background checks on the fan, Thermoelectric
Cooling (TEC), and temperature.
TYPE IN: RESPONSE EXPLANATION
PSC ON
CR-LF Enables the background checks for fan, TEC, and
temperature feature.
PSC OF
CR-LF Disables the background checks for fan, TEC, and
temperature feature.
PSC?
Queries the current setting.
PSC xx Background check feature is set as indicated.
3.4.27 Serial Communication Protocol
This command allows hardware autodetection override. The command will not be saved in your
settings, and the camera will always power up with autodetection enabled.
TYPE IN: RESPONSE EXPLANATION
SCP 232
CR-LF Indicates selection of RS232 protocol.
SCP 422
CR-LF Indicates selection of RS422 protocol.
SCP?
Queries the current setting.
SCP xxx Indicates communications protocol selected.
3.4.28 Fast Read Mode
The command allows the user to reduce the read out time delay from one frame (67 milliseconds)
to one line (63 microseconds). The user needs to ensure that their frame grabber board is
programmed to re-order the image, as the image will be received from the top and bottom and will
move toward the center.
TYPE IN: RESPONSE EXPLANATION
FAS ON
CR-LF Enables the Fast Read mode.
FAS OF
CR-LF Disables the Fast Read mode.
FAS xx Indicates Fast Read mode set as shown.
91000116-001 Revision B 3-10 10/15/02