User`s manual

MegaPlus
®
Model ES 4.0/E
2.5 Routine Maintenance
There are no user serviceable parts inside the camera. The camera must be returned to the
factory for repair if a malfunction occurs.
The lens and the sensor cover glass should only be cleaned using dust-free compressed air.
Clean the exterior of the camera with a soft, dry, lint-free cloth. For stubborn dirt, the cloth may
be dampened with a mild soap solution.
2.6 Technical Support/Contact Information
FOR TECHNICAL SUPPORT OR OTHER INFORMATION,
CONTACT US AT:
Telephone: [phone] (USA and Canada only)
Outside the USA: [phone]
Fax: [phone]
Internet: www.redlake.com
Mailing Address:
Redlake MASD, Inc., 11633 Sorrento Valley Road, San Diego, California 92121-1010
For international customers, please contact your authorized Redlake MASD, Inc. Distributor for
information. You may also contact one of the below listed service centers:
Roper Scientific BV (Europe, Middle East and Africa):
Telephone: [phone]
Fax: [phone]
Internet: [e-mail]
Mailing Address:
Roper Scientific BV, Ir. D.S. Tuijnmanweg 10, 4131 PN Vianen, Nederland
Nippon Roper KK, Japan: (For Japan Only)
Telephone: [phone]
Fax: [phone]
Internet: [e-mail]
Mailing Address:
Nippon Roper KK, 6F Sakurai Building, 2 8 19 Fukagawa Koto Ku, Tokyo, 135-0033,
Japan
91000116-001 Revision B 2-5 USER’S MANUAL