Installation Guide

For use with 3-inch Redi2Set glass block
SEAM KIT
The Seam Kit is used to join together
two Redi2Set Glass block windows to
make one larger window.
STEP 1:
Measure and cut spacer to size
STEP 2:
Silicone top and bottom edges of spacer and
join together two window panels
· Not for projects over 25 sq. ft.
· For use only with 3 in. thick REDI2SET glass block windows
· Made in the USA
STEP 3:
Run a bead of silicone on the outside joints of
both sides of the panel
*Also squeeze a small dab of silicone in the space where the corners of
the block meet
Tip: For a professional look, tool the silicone joints by using the
rounded edge of a plastic spoon
Spacer
Includes a 3 in. x 32 in. (actual size: 2 5/8 in. x 31 1/2 in.)
spacer and a tube of REDI2BOND glass block silicone
·