Installation Guide
RDQCI5023 Rev. 0 Page 7 Cered 06/01/2016
EXTERIOR
HEADER
INTERIOR
PANEL
EXTERIOR
PANEL
TUB
TRACK
TRIM
RING
BRACKET
TOWEL
BAR
7 Lift the interior panel (textured side of glass
on the same side as the top fin) into position with the
rollers engaging the roller track in the header.
Repeat for the exterior panel (textured side of glass on
the opposite side as the top fin).
Check for alignment along the bottom and sides of
each panel and adjust the rollers as necessary.
8 Before finishing the installation, it
is necessary to determine the proper closed
position of the door panels.
For maximum water control, position the
interior panel closest to the shower head.
(see illustration)
9 Slide the four metal towel bar trim rings [K]
over the clear acrylic towel bar brackets [L]. Press
the brackets into the ends of the two towel bars [M].
RDQCI5023 REV. 0
Page 6
Certified 06/22/2016