MSDS

MATERIAL SAFETY DATA SHEET
-------------------------------------------- I. PRODUCT IDENTIFICATION -------------------------------
TRADE NAME (as labeled): Redi Poxy Part C
CHEMICAL FAMILY:
Proprietary Blend
MANUFACTURER'S NAME:
Tile Redi USA, LLC
Tile Redi LTD
Tile Redi Internet Sales, LLC
4450 N.W. 126th Ave Suite 101
Coral Springs, Florida 33065
Phone number for additional information: 800-232-6156
Date prepared or revised: 10/2010 Name of preparer: S.B. Fine
-------------------------------------------- II. HAZARDOUS INGREDIENTS ----------------------------
CHEMICAL NAMES CAS
NUMBERS
PERCENT ACGIH TLV OSHA PEL
OTHER
(SPECIFY)
Silica Sand
14808-60-7
50 - 90
50 micro g/m³
10 mg/m³
N/A
Aluminum Oxide
1344-28-1
0 - 4
10 mg/m³
15 mg/m³
N/A
Titanium Dioxide
13463-67-1
0 - 12
10 mg/m³
15 mg/m³
N/A
N/A = Not applicable or available
------------------------------------------ III. HEALTH HAZARD INFORMATION -----------------------
SYMPTOMS OF OVEREXPOSURE for each potential route of exposure. (Possible Longer Term
Effects) Inhaled: Symptoms are dyspnea-caused by many lung scars that develop from the dust-pain
in chest, decreased vital Chronic lung scarring leads to a progressive massive fibrosis that is often
accompanied by increased susceptibility to the risk of impaired health due to a combination of
smoking and dust exposure. Persons with reduced pulmonary function may be at increased risk.
capacity and cough. Inhalation of the dust can cause silicosis and may cause lung cancer depending
on duration and level of exposure
SIGNS AND SYMPTOMS OF EXPOSURE (Acute effects) Eye contact may cause eye irritation.
Inhalation of dust may cause lung irritation.
SUSPECTED CANCER AGENT?
NO: This product's ingredients are not found in the lists below.
YES: Federal OSHA NTP x IARC