SDS

ManualsBrandsRedi Base ManualsBath30 in. x 60 in. Double Threshold Shower Base with Right Drain

MATERIAL SAFETY DATA SHEET

-------------------------------------------- I. PRODUCT IDENTIFICATION -------------------------------

TRADE NAME (as labeled): Redi Poxy Part A

CHEMICAL FAMILY:

Amine epoxy curing agent

MANUFACTURER'S NAME:

Tile Redi USA, LLC

Tile Redi LTD

Tile Redi Internet Sales, LLC

4450 N.W. 126th Ave Suite 101

Coral Springs, Florida 33065

Phone number for additional information: 800-232-6156

Date prepared or revised: 10/2010 Name of preparer: S.B. Fine

-------------------------------------------- II. HAZARDOUS INGREDIENTS ----------------------------

CHEMICAL NAMES

CAS NUMBERS

PERCENT

ACGIH TLV

OSHA PEL

OTHER

(SPECIFY)

Tetraethl yene

pentami ne reacti on

products with tall oil

f atty aci ds

68953-36-6 70-75 N/A N/A

Tetraethl yene

pentamine

112-57-2 5-10 N/A N/A

1-(2-

aminoethyl piperazine)

140-31-8

1-4

N/A

Tris2-4-

6(diaminomethyl )

phenol

90-72-2

1-3

N/A

N/A = Not applicable or available

------------------------------------------ III. HEALTH HAZARD INFORMATION -----------------------

SYMPTOMS OF OVEREXPOSURE for each potential route of exposure. (Possible Longer Term

Effects). Sensitization and asthmatic reaction may develop with continued exposure to vapors.

SIGNS AND SYMPTOMS OF EXPOSURE (Acute effects)

Inhaled: Breathing vapors may cause irritation of the nose and throat. Symptoms associated with

pre-existing lung disorders may be aggravated by exposure to this material.

Contact with skin or eyes: This material causes severe eye irritation. Direct contact with the material

or exposure to vapor or mists may cause stinging, tearing, redness, blurred vision, and chemical

burns of the cornea. Burns of the eye may cause blindness. This material is corrosive to skin. Skin

sensitization and allergic reaction are possible.

Summary of content (14 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET -------------------------------------------- I. PRODUCT IDENTIFICATION ------------------------------TRADE NAME (as labeled): Redi Poxy Part A CHEMICAL FAMILY: Amine epoxy curing agent MANUFACTURER'S NAME: Tile Redi USA, LLC Tile Redi LTD Tile Redi Internet Sales, LLC 4450 N.W. 126th Ave Suite 101 Coral Springs, Florida 33065 Phone number for additional information: 800-232-6156 Date prepared or revised: 10/2010 Name of preparer: S.B.
PAGE 2
MATERIAL SAFETY DATA SHEET Absorbed through skin: N/A Swallowed: Not likely to occur in typical industrial environments however ingestion of this material may be harmful or fatal. SUSPECTED CANCER AGENT? x NO: This product's ingredients are not found in the lists below. YES: Federal OSHA NTP IARC ------------------------------IV. FIRST AID: EMERGENCY PROCEDURES----------------------------------------Eye Contact: Hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes.
PAGE 3
MATERIAL SAFETY DATA SHEET ----------------------------------- VI. SPILL, LEAK, AND DISPOSAL PROCEDURES ----------------------Spill response procedures (include employee protection measures): Dam and absorb spill with absorbent materials, minimize breathing vapors. Increase ventilation. Wear impervious gloves, safety goggles, and NIOSH approved organic vapor canister type respirator. Preparing wastes for disposal (container types, neutralization, etc.): Absorb spill on sand, earth, or vermiculite.
PAGE 4
MATERIAL SAFETY DATA SHEET Vapor pressure, mmHg at 20°C: N/A Appearance and odor: Amber colored liquid with amine odor HOW TO DETECT THIS SUBSTANCE (warning properties of substance as a gas, vapor, dust, or mist): ---------------------------------------------------- X. REACTIVITY DATA ----------------------------------------------x Stable Unstable Stability: Conditions to avoid: N/A Incompatibility (materials to avoid): Oxidizing Agents (i.e. perchlorates, nitrates etc.).
PAGE 5
MATERIAL SAFETY DATA SHEET -----------------------------------------------XIII. Disposal Information-------------------------------------------------Dispose in compliance with local, state, and federal regulations. ------------------------------------------------XIV. Transport Information--------------------------------------------------DOT DOT Proper Shipping Name: Amines liquid Corrosive, n.o.
PAGE 6
MATERIAL SAFETY DATA SHEET ------------------------------------------------XVI Other Information--------------------------------------------------------This information is furnished without warranty, representation, inducement or license of any kind; except that it is accurate to the best of our knowledge, or obtained from sources believed by us to be accurate. r obtained from sources believed by us to be accurate.
PAGE 7
MATERIAL SAFETY DATA SHEET -------------------------------------------- I. PRODUCT IDENTIFICATION ------------------------------TRADE NAME (as labeled): Redi Poxy Part B CHEMICAL FAMILY: Epoxy Resin MANUFACTURER'S NAME: Tile Redi USA, LLC Tile Redi LTD Tile Redi Internet Sales, LLC 4450 N.W. 126th Ave Suite 101 Coral Springs, Florida 33065 Phone number for additional information: 800-232-6156 Date prepared or revised: 10/2010 Name of preparer: S.B.
PAGE 8
MATERIAL SAFETY DATA SHEET Swallowed: Causes gastrointestinal irritation and possible burns if swallowed SUSPECTED CANCER AGENT? x NO: This product's ingredients are not found in the lists below. YES: Federal OSHA NTP IARC ------------------------------IV. FIRST AID: EMERGENCY PROCEDURES----------------------------------------Eye Contact: Hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.
PAGE 9
MATERIAL SAFETY DATA SHEET ------------------------------------------VII. Handling and Storage---------------------------------------------------------Store in cool dry area. -------------------------------------- VIII.
PAGE 10
MATERIAL SAFETY DATA SHEET Conditions to avoid: Masses of more than 1 pound of product plus an aliphatic amine will cause irreversible polymerization with considerable heat build up. -----------------------------------------------XI. Toxicology Information------------------------------------------------LD 50 for skin absorption for rabbits = 20,000 mg/kg -----------------------------------------------XII.
PAGE 11
MATERIAL SAFETY DATA SHEET -------------------------------------------- I. PRODUCT IDENTIFICATION ------------------------------TRADE NAME (as labeled): Redi Poxy Part C CHEMICAL FAMILY: Proprietary Blend MANUFACTURER'S NAME: Tile Redi USA, LLC Tile Redi LTD Tile Redi Internet Sales, LLC 4450 N.W. 126th Ave Suite 101 Coral Springs, Florida 33065 Phone number for additional information: 800-232-6156 Date prepared or revised: 10/2010 Name of preparer: S.B.
PAGE 12
MATERIAL SAFETY DATA SHEET ------------------------------IV. FIRST AID: EMERGENCY PROCEDURES----------------------------------------Eye Contact: Hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately. Skin Contact: If irritation occurs, remove affected clothing and wash the skin exposed. Inhaled: Remove to fresh area. For extreme respiratory distress, administer oxygen.
PAGE 13
MATERIAL SAFETY DATA SHEET Other clothing and equipment: long sleeved clothing Work practices, hygienic practices: normal good housekeeping Other handling and storage requirements: keep away from strong alkalis and oxidizers Protective measures during maintenance of contaminated equipment: Wear NIOSH approved dust mask, safety glasses, gloves ------------------------------------------------ IX.
PAGE 14
MATERIAL SAFETY DATA SHEET ------------------------------------------------XV. Regulatory Information-------------------------------------------------All ingredients are listed on the U.S. EPA TSCA inventory of chemical substances. This product contains a chemical known to the State of California to cause cancer or reproductive harm.