Specifications

RAM Mounts
www.racerpartswholesale.com
32
Ram 2.5" Base with
1" Ball
RAM-B-202 ..................$9.16
Ram Base
with U-Bolt
RAM-B-231 (pictured) ..............
3/4”-1” diameter ....$11.39
RAM-B-231-1U ..........................
1-1/4” diameter......$11.27
Ram 2-7/16" x 1-5/16"
Base with Ball
The RAM universal plate has
a 1.0" diameter rubber ball
connected at right angles
to a 1-1/4" x 2-1/2"
diamond plate. The plate has
two holes 1.912" from center to center,
positioned at either tip of the diamond
plate. This base plate will attach to any of
the RAM composite HOL holders and the
industry standard AMPS hole pattern.
RAM-B-238
............................................$5.45
Ram Motorcycle Base
with 1" Ball
The RAM-B-309-1 (single 1" ball) and
RAM-B-309-2 (double 1" ball) mount bases
are part of the RAM 309 Clutch/Brake
Motorcycle Family. These bases connect
to your handlebar clutch/brake clamp, left
or right side, and hold one or two
1" diameter mounting balls. The base fits
the control clamps on your motorcycle with
40mm x 6mm stainless steel hardware,
provided in the kit.
RAM-B-309-1 (pictured)
................................
With 1- 1” Ball......................$11.96
RAM-B-309-2..................................................
With 2- 1” Balls....................$21.67
RAM is the revolutionary universal ball and socket mounting system that
allows you to mount practically anything anywhere. RAM Mounts are
unique in design, providing easy installation, mobility, strength,
versatility, vibration protection and durability, all at a low cost. RAM
Mounts are backed by NPI's renowned Lifetime Warranty which makes
them the mounting systems of choice.
Ram Base with 9mm Hole &
1" Ball
This part is often used
on motorcycles to
attach to the mirror
frame (mainly BMW).
RAM-B-272U ......................................$16.74
Ram
Motorcycle
Stem Base
w/1" Ball
RAM-B-342U ..$12.42
Ram Reservoir
Cover Center
Ball
RAM-B-345U ..$17.76
Ram Base Adapter
for Tom Tom Rider
2-7/16” x 1-5/16” base
RAM-B-238-T02U
....$7.22
The image to the right
shows the TomTom
Rider unit mounted with
a Ram B-231-1U U-Bolt
Mount, a B-201 Arm, and
B-238-TO2U Tom Tom
Rider Adapter.
Ram Reservoir
Cover Side Ball
RAM-B-346U ....$18.58
Ram Double Socket Arm for 1" Balls
The double socket arm has a socket at either end to allow 1" diameter ball accessories to be
connected. A tightening screw on the side of the arm enables the sockets to clamp firmly to a
RAM 1" diameter ball. When loosening the side screw, a single spring inside the arm opens the
sockets allowing you to pivot the ball and socket connection or completely disconnect the ball from
the socket. 1.75”, 3” and 6” lengths are available (measured socket to socket).
RAM-B-201
..........................................3” Long Arm, Black ............................................$11.10
RAM-B-201-A ....................................1-3/4” Short Arm, Black ......................................$9.75
RAM-B-201-C
....................................6” Long Arm, Black ............................................$17.75
RAM-B-201-CHU................................3” Long Arm, Chrome ........................................$40.57
RAM-B-201-ACHU
............................1-3/4” Short Arm, Chrome ................................$36.75
RAM-B-201RAM-B-201-ACHU
Ram Clamp Base
with 2" Max Width
RAM-D-247U-2 ........$46.08
RAM BASE
2" X 3"
with 1" BALL
RAM-B-202U-23 ..................................$14.95
Ram Cycle Pivot
Base with Stud
RAM-B-360U ........$17.95
Guaranteed
Lowest
Prices!