Manualshelf

Instructions / Assembly

ManualsBrandsRedCore ManualsHeating, Ventilation, and Air Conditioning1500-Watt S2 Infrared Electric Portable Stove Heater
12345678910
CHANGING THE LIGHT BULB
1. Open the door of unit with the handle.
2.
Loosen the 2 screws at the front of the log set inside the stove. Carefully lift the
logset up far enough to access the light bulbs. You will find 1 X 40W Type B-10
candelabra light bulb with E-12 socket base at the bottom.
3. Replace burned out light bulb using new 40 watt Type B-10 candelabra light bulb
.
4.
Reinstall the logset.
5.
Plug in the unit.
WARNING:
Disconnect power and unplug the power cord before attempting any maintenance
or cleaning to reduce the risk of fire, electric shock or personal injury. The bulbs in
your unit can become extremely hot. Allow at least ten (10) minutes between
turning off the unit and removing the light bulbs to avoid the accidental burning of
the skin.