Concept S-2 Indoor Infrared Stove Heater RedCore Stove Heater 2011-04-20
CUSTOMER SUPPORT DO NOT RETURN THIS PRODUCT TO THE STORE WHERE YOU BOUGHT IT FOR IMMEDIATE CUSTOMER SERVICE, PLEASE CALL: 888-4BGT HEAT (888-424-8432) A CUSTOMER SERVICE REPRESENTATIVE WILL ASSIST YOU WITH ANY QUESTIONS REGARDING YOUR CONCEPT S-2 STOVE HEATER
TM Thanks for choosing the RedCore Concept S-2 Infrared Stove Heater! We help our customers save money on energy bills while improving their comfort with state-of-the-art heating products. The RedCore™ Concept S-2 Infrared Stove Heater is a durable room heater that produces soft infrared heating that will keep you comfortable and help you reduce energy bills. Please refer to our website for further information on all RedCore™ products. Best Green Technologies, LLC E-Mail: sales@bestgreenllc.com www.
PRECAUTION WARNING 1: WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PERSONS. WARNING 2: RISK OF ELECTRIC SHOCK. NO USER-SERVICEABLE PARTS INSIDE. WARNING 3: HEATER MAY BE HOT TO THE TOUCH WHEN IN USE. DO NOT TOUCH AREA NEAR HEATER ELEMENT WHEN HEATER IS OPERATING. 1. Read all instructions before using this appliance. 2. The heater is hot when in use.
8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped over. 9. To disconnect the appliance, turn Power Switch to off, wait for heater to cool down and shut off, and then remove plug from outlet. 10. Connect to properly polarized outlets only. This product requires a three prong outlet with ground. 11.
periodically for signs of overheating or deformations of the plug. If any overheating or deformation is present, immediately discontinue using the receptacle and contact a qualified electrician 19. CAUTION: To prevent electric shock, match wide blade of plug to wide slot of receptacle and insert completely. 20. Do not cover the appliance while it is functioning in order to avoid overheating and/or risk of fire. 21.
LEG ASSEMBLY Before using your unit please install the legs as shown in diagram below. OPERATION Controls and switches are located on front panel inside the glass door.
POWER: Press this button into the I position for main power and flame effect. The indicator light will turn on. See below for other control switches. LOW HEAT: For low infrared heat function (1000 Watts), press this switch while the Power switch is in the I position for low heat. The indicator light will turn on. HIGH HEAT: For high infrared heat function (1500 Watts), press this switch while the power and Low switches are in the I position for high heat. The indicator light will turn on.
functions will stop even though the switches may be in the I position. CAUTION: If you use this heater in conjunction with a thermal control, a program controller, a timer or any other device that switches on the heater automatically, remember to observe all safety warningS at all times. The stove heater has safety overheat protection. If the overheat protection trips, turn off the Power Switch and unplug the power cord from the receptacle. It will reset automatically after 5 minutes.
CHANGING THE LIGHT BULB 1. Open the door of unit with the handle. 2. Loosen the 2 screws at the front of the log set inside the stove. Carefully lift the logset up far enough to access the light bulbs. You will find 1 X 40W Type B-10 candelabra light bulb with E-12 socket base at the bottom. 3. Replace burned out light bulb using new 40 watt Type B-10 candelabra light bulb. 4. Reinstall the logset. 5. Plug in the unit.
CLEANING To clean the stove heater first turn off Power and unplug the heater from its power source. To clean the glass door, remove dust with a clean dry cloth or to remove finger prints and other marks clean glass with clean damp cloth. Do not use abrasive cleaners or spray liquids on glass door surface. Metal and metal painted parts should be cleaned with damp cloth. Do not use abrasive cleaners or spray liquids on these surfaces.
BEST GREEN TECHNOLOGIES LLC Limited Warranty &Limited Lifetime Warranty on PTC Heating Element Only Best Green Technologies LLC (“BGT”) warrants this RedCore™ portable room heater to the original retail purchaser (“Purchaser”), for one year from the date of purchase, against defects in material and workmanship under normal use and service. BGT further warrants the following components: - PTC ceramic heating element for lifetime of product.
• • • • • Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions in the instructions. Damage to the finish of the case, or other appearance parts caused by the wear. Damage caused by repairs or alterations of the unit by anyone other than those authorized by Best Green Technologies. Subjective claims regarding decibel level of heater fan when product is operating at normal fan decibel levels.
CUSTOMER SUPPORT DO NOT RETURN THIS PRODUCT TO THE STORE WHERE YOU BOUGHT IT FOR IMMEDIATE CUSTOMER SERVICE, PLEASE CALL: 888-4BGT HEAT (888-424-8432) A CUSTOMER SERVICE REPRESENTATIVE WILL ASSIST YOU WITH ANY QUESTIONS REGARDING YOUR CONCEPT S-2 STOVE HEATER www.redcoreheaters.
