Specifications

Industrial Supply, Inc.
Brass SAE 45⁰ Flare Fittings
Typical Application:
LP and natural gas, flammable
liquids (special order),
instrumentation, refrigeration,
power steering, power steering,
hydraulic & pneumatic systems.
Pressure:
Operating pressure up to
2000 psi depending on
tube size.
Vibration:
Good resistance – use long
nut when greater vibration
resistance is required.
Temperature Range:
-65⁰F to +250⁰F.
Material:
CA360 Brass.
Used With:
Copper, brass, aluminum
& steel hydraulic tubing
that can be flared.
Brass SAE 45⁰ Flare Fittings
Advantages:
Low cost and reusability,
Long or short nut. Good
resistance to vibration.
Conformance:
Listed by Underwriters
Laboratories for flammable
liquids, refrigeration & gas.
Meets specifications &
standards of ASA, ASME, MS
& SAE.
Ordering Information:
Order individually by catalog
number.
Assembly Instructions:
Tighten assembly with a
wrench until a solid feeling is
encountered. From that point,
apply1/6 turn.
Tube O.D. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4
Thread Size - B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-18 3/4-16 7/8-18 1-1/16-16
Nut
Long Nut
Cap
Item #
Tube
O.D.
WH37X3
WH37X4
WH37X5
WH37X6
WH37X8
WH37X10
WH37X12
3/16
1/4
5/16
3/8
1/2
5/8
3/4
“The Name in Fasteners”
FITTI
NGS
WH1110X4
WH1110X5
WH1110X6
WH1110X8
WH1110X10
WH1110X12
1/4
5/16
3/8
1/2
5/8
3/4
Item #
Tube
O.D.
Item #
Tube
O.D.
WH41X4
WH41X5
WH41X6
WH41X8
WH41X10
1/4
5/16
3/8
1/2
5/8