Specifications

Call Toll Free: 1-877-429-8266
24 Hour Fax: [phone]
FITTI
NGS
Brass Inverted Flare Fittin
g
s
Typical Application:
Hydraulic brake, power
steering, fuel lines and
transmission cooler lines,
LP and natural gas (special –
order).
Pressure:
Operating pressure up to
2000 psi.
Vibration:
Excellant resistance.
Temperature Range:
-65⁰F to +250⁰F.
Material:
CA360 Brass.
Used With:
Copper, brass, aluminum
& steel hydraulic tubing
that can be flared.
Brass Inverted Flare Fittings
Advantages:
Very low cost and reuseable.
Seats and threads are internal
and protected. Compact,
excellent vibration life.
Conformance:
Listed by Underwriters
Laboratories for fuel
equipment, refrigeration &
gas, (available on special
order).Meets specifications &
standards of ASA, ASME, &
SAE.
Ordering Information:
Order individually by catalog
number.
Assembly Instructions:
Tighten assembly with a
wrench until a solid feeling is
encountered. From that point,
apply1/6 turn.
Tube Nut - Steel
WH105X2 1/8
WH105X3 3/16
WH105X4 1/4
WH105X5 5/16
WH105X6 3/8
WH105X6X7 11/16
WH105X7 7/16
WH105X8 1/2
WH105X10 5/8
WH105X12 3/4
Tube
O.D. Item #
Tube Nut - Brass
WH100X3 3/16
WH100X4 1/4
WH100X5 5/16
WH100X6 3/8
WH100X8
1/2
Item #
Tube
O.D.
Plug - Steel
WH131X3 3/16
WH131X4 1/4
WH131X5 5/16
WH131X6 3/8
WH131X8
1/2
Item #
Tube
O.D.
Tube Nut Long - Steel
WH7896X3 3/16
WH7896X4 1/4
Item #
Tube
O.D.
Union
Tube O.D. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1
Thread Size - B 5/16-28 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18 1-1/16-16 1-3/16-16 1-5/16-16
Thread size h
A
WH302X2 1/8
WH302X3 3/16
WH302X4 1/4
WH302X5 5/16
WH302X6 3/8
WH302X8 1/2
Item #
Tube
O.D.