RER11289 Redcat Portal Axle Kit Instructions

Redcat Racing

Now, let’s move on to the rear of the vehicle.

Here’s what you should be starting with:

Go ahead and remove the screws and nuts that secure the

upper and lower links and shocks to the axle housing, as

well as the screw pin that secures the drive shaft to the

input shaft.

The end result will look like this:

Next, unbolt the top of the shocks from the chassis to

separate them from the vehicle. You’ll also need to pop the

lower ball out of the rod ends on both shocks, and set the

shocks aside for now.

Here’s what your chassis should resemble currently:

Now is a good time to adjust the direction the curves in the

suspension links face. This will ensure all links will properly

clear the frame rails and drive shaft. The lower links will

need to be curved outward, and the upper links will need to

be curved up, toward the top of the vehicle.

Here is how they should look:

10)

11)

12)

Installation Instructions

Redcat Racing

Installation Instructions

Redcat Racing

Portal Axle Upgrade Kit Installation Instructions