Warranty

9
Operation
Safety Key
The lawn mower safety key is located under the battery cover (see
Figure 4). When the key is removed the power supply to the motor
is interrupted. To insert the safety key press down until the key
clicks into place. To remove the key, press the lock
1
and pull out
the safety key
2
.
Remove the safety key if the unit is left unattended;
before adjusting, cleaning or performing other work on the unit;
before removing blockages or obstacles in the lawn mowers path.
Powering the Lawn Mower
To switch ON press the switch interlock and hold down. Pull the
power activation bar towards the handle (see Figure 5). The motor
starts.
Release the power activation bar to turn the motor off.
Risk of injury! After releasing the power activation bar,
the cutting blade continues running briefly.
Adjusting the Cutting Height
The cutting height can be varied in 7 increments from 1 to 3 inches
with the cutting height adjustment. Pull the handle outwards
slightly to set the cutting height and release the lever (see Figure 6).
Emptying the Grass Catcher
When the grass catcher bag is full it should be emptied
immediately. Release the power activation bar to switch the motor
off. Wait until the blade stops. Lift the discharge ap. Remove the
grass catcher. Lower the discharge ap down again. Empty the
grass catcher.
Working without the Grass Catcher
When working without the grass catcher, the mowed grass is
ejected directly downwards.
Attaching the Side Discharge and Discharge Plug
Lift the discharge ap. Hook the side discharge into the lawn-
mower. Fold the ap down. Lift the back cover of the mower .
Hook the discharge plug into the lawn-mower. Fold the back cover
down (see Figure 7).
!
CAUTION
!
WARNING
SAFETY
KEY
BATTERY
COMPARTMENT
Figure 4
Figure 6
SWITCH
INTERLOCK
(ON/OFF)
POWER
ACTIVATION
BAR
Figure 5
HEIGHT
ADJUSTMENT
HANDLE
1
2
Figure 7
DISCHARGE
PLUG
SIDE
DISCHARGE