Warranty

7
Assembly
Attaching the Handlebars
1. Align the lower handlebars with the handlebar brackets, push a
hex bolt through on the top and secure with a hex nut on each
side. Push a long carriage bolt through on the bottom and secure
with a washer and triangle knob (see Figure 1).
2. Place the upper handlebars on the lower handlebars aligning
the holes in each. Insert the curved head bolt through the holes
in the upper handle, the lower handle, plastic bushing and at
washer then secure with the triangle knob. Turn the triangle knob
to tighten securely (see Figure 2).
Attaching the Grass Catcher
Lift the discharge ap. Hook the grass catcher bag into the lawn-
mower. Fold the discharge ap down (see Figure 3).
Inserting/Replacing the Battery
Charge the battery as described in the charger operation manual.
Open the battery cover
1
. Press the charged battery into the
power tool until it clicks into place
2
. Close the battery cover
3
.
To remove, press the release button
1
and pull out the battery
2
.
Protect the battery contacts when the battery is not being used.
Metal objects may short-circuit the contacts and pose
both an explosion and fire hazard!
Battery Charge Indicator
The unit has a LED battery charge indicator
on the handlebar. The LED shows 4 meaning
there is 100% battery power, 3 is 75% power,
2 is 50% power, 1 is 25% power and 0
indicates there is no power .
!
CAUTION
Figure 1
1
2
1
2
3
LONG
CARRIAGE BOLT
TRIANGLE
KNOB
LOWER
HANDLEBARS
HANDLEBAR
BRACKET
Figure 3
DISCHARGE
FLAP
HEX
BOLT
HEX NUT
WASHER
Figure 2
FLAT
WASHER
TRIANGLE
KNOB
CURVED
HEAD BOLT
PLASTIC
BUSHING
“4” ~ 100%
“3” ~ 75%
“2” ~ 50%
“1” ~ 25%
“0” ~ 0%