20V Lithium Ion Cordless Line Trimmer MODEL # 106487 Operation Manual ! This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information may result in serious injury or death.
For Service or Questions Call 1-877-487-8275 720-287-5182 www.redbackpowerusa.
Table of Contents Important Safety Information Intended Use ...........................................................................................4 Personal Protective Equipment ............................................................4 General Safety .........................................................................................5 Safety Decals ..........................................................................................6 Auger Assembly.........................................
Important Safety Information ! WARNING WARNING: Read and thoroughly understand all instructions and safety information before assembling or operating the line trimmer. Failure to do so may cause serious injury or death. Do not allow anyone to operate this line trimmer who has not read this manual. As with all power equipment, a line trimmer can be dangerous if assembled or used improperly. Do not operate this line trimmer if you have doubts or questions concerning safe operation.
Important Safety Information General Safety Failure to follow warnings, cautions, assembly and operation instructions in the Operation Manual may result in serious injury or death. ! DANGER READ THE OPERATION MANUAL BEFORE OPERATION. • Do not permit children to operate this equipment at any time. • Do not permit others that have not read and understood the complete Operation Manual to operate this equipment. • The line trimmer can propel objects it strikes at high speeds.
Important Safety Information Safety Decals Safety labels on the line trimmer are to remind you of important information while you are operating the unit. Make sure all safety warning decals are attached and in readable condition. Replace missing or defaced decals. Contact Redback USA at 1-877-487-8275 for replacement decals.
Line Trimmer Assembly TRIMMER GUARD Installing the Trimmer Guard The trimmer guard is an essential part of the line trimmer and must ALWAYS be used to prevent damage to the trimmer and injury to the operator. The guard is not attached to the trimmer when it is delivered to avoid damage in transit. To attach the guard, align the opening in the guard with the underside of the trimmer head (see Figure1), and secure with four screws in four places.
Overview of Components SAFETY SWITCH BATTERY LED INDICATOR BATTERY CONNECTION ON/OFF SWITCH UPPER HANDLE LOWER HANDLE TRIMMER SHAFT PLANT GUARD CUTTING HEAD TRIMMER GUARD TRIMMER LINE 8
Operation Attach the shoulder belt to the unit. Pull the shoulder belt over your head. Hold the unit with both hands: one hand on the upper handle, the other hand on the lower handle. SAFETY SWITCH The line trimmer is ready to operate once the battery is installed. To operate press and hold the safety switch at the same time as the ON/OFF switch (see Figure 4). ON/OFF SWITCH Figure 4 Keep the cutting attachment parallel to the ground and make sweeping movements from side to side. Walk slowly forwards.
Maintenance ! CAUTION Before performing any maintenance on the line trimmer, remove the battery. Figure 5 Replacing Trimmer Line Always use a cutting line with a diameter of 0.095”(2.4mm) max. If a thicker line is used, the motor may overheat or fail. 1. Insert the end of the cutting line into the retaining lug of the spool on one side (see Figure 5). 2. Insert the end of the cutting line into the retaining lug of the spool on the other side (see Figure 6). 3.
Cleaning & Storage Cleaning Do not use water or liquid detergents. Remove dirt and dust from the housing with a soft brush and dry cloth. Remove grass clippings from the underside of the trimmer. Keep the ventilation slots clean and free of dust. Storage Remove the battery from the line trimmer when not in use. Store the line trimmer in a dry, dust-free and frost-free place ideally in a temperature range of 50° - 77°F (10-25 °C). Store the battery and the unit separately.
Warranty & Specifications IMPORTANT NOTICE We, the manufacturer, reserve the right to change the product and/ or specifications in this manual without notification. The manual is for information usage only and the pictures and drawings depicted herein are for reference only. Warranty Repair and Service Do not return this product to the store for warranty issues or repair. Call our customer service department at 720-287-5182, 1-877-487-8275, or visit www.redbackpowerusa.