Use and Care Manual

9
Assembly
Inserting/replacing the battery
Protect the battery contacts when the
battery is not being used. Loose metal parts
may short-circuit the contacts –
Explosion and fire hazard!
Charge the battery as described in the user manual of the charger.
1. Open the battery cover
1
(see Figure 10). Press the charged
battery into the power tool until it clicks into place
2
. Close the
battery cover
3
.
2. To remove (see Figure 11), press the release button
1
and pull out
the battery
2
.
!
CAUTION
Figure 10
1
2
3
Figure 11
1
2