Use and Care Manual

8
Assembly
Grass Catcher Assembly
1. Attach the two lower parts of the grass catcher together until
they click and lock into position
1
(see Figure 5).
2. Secure with two srews at the bottom of the grass catcher
2
(see Figure 6).
3. Attach the upper grass catcher component to the lower
portion and press together until they click
3
.
Attaching the grass catcher (see Figure 7)
1. Lift the discharge ap
1
.
2. Hook the grass catcher bag into the lawnmower
2
.
3. Fold the discharge ap down again
3
.
Adusting the handle height (see Figure 8).
To adapt to the height of the user the handlebar can be adjusted
to three different positions.
1. Loosen the quick-clamping lever
1
.
2. Move the handle to the desired height
2
.
3. Flip the quick-clamping lever.
Adjusting the cutting height (see Figure 9).
The cutting height can be varied in 5 increments from 1”to 3”
with the cutting height adjustment
1
.
1. Pull the handle outwards slightly.
2. Set the required cutting height.
3. Release the lever again.
Figure 5
1
2
Figure 6
3
Figure 7
1
2
3
Figure 9
Figure 8
1
2
1