Use and Care Manual

7
Assembly
Safety Key
The lawn mower has a security key. The key is located under the
battery cover (see Figure 1). By remowing the key, the power supply
to the motor is interrupted.
Remove the safety key if the unit is left unattended; before checking,
cleaning or performing other work on the unit; before removing
blockages; if a foreign object is hit; or if the unit starts vibrating
excessively.
1. To remove the key press the lock
1
and pull out the safety key
2
. To insert the safety key press down the key until it clicks.
Attaching the Handlebars
When collapsing or unfolding the handlebar, the cable could be
damaged. Ensure that the cable is not kinked. Tools are not required
to attach the handlebar.
1. Fold the lower handle upwards
1
. Align the marks. Flip the quick-
clamping levers on both sides of the lower handle
2
.
2. Place the upper handle on the lower handle
3
.
3. Attach the upper handle
4
:
Insert the threaded bolt of the quick clamping lever (A) through
the holes in the upper handle (B) and the lower handle (D). Pull
the handles slightly apart and place the spring (C) between the
handles on the threaded bolt. Screw the nut (E) a few turns onto
the threaded bolt. Flip the quick-clamping levers
5
.
Note: If it not possible to completety ip the quick clamping lever,
loosen the nut slightly.
4. Attach the cable with the two cable clamps
6
(see Figure 4).
!
CAUTION
Figure 1
1
2
1
2
Figure 2
Figure 3
3
4
5
6
Figure 4