Brochure

redarc.com.au/trailer-brakes
Manufacturer Product code Vehicle
Wiring Kit to suit
Ford Ranger and
Everest
TPWKIT-012 Suitable with all Ford
on-board systems
Universal Tow-Pro
Wiring Kit
TPWKIT-013 Suitable for vehicles
where the start battery,
Tow-Pro main unit and
cable run to the cabin
are all in-line.
Universal Tow-Pro
Extended Wiring Kit
TPWKIT-014 Suitable for vehicles
where the start battery
is on the other side of
the vehicle from the
installation.
Universal Wiring Kits
(TPWKIT‑01X)
Provide ‘Plug and Play’ style
connectivity, ensuring a quicker and
more convenient installation of the Tow-Pro Elite.
Each kit includes hardware and fitting instructions to deliver
a high quality and reliable outcome for every installation.
Description Product code
Encapsulated Protection Device EPDK-001
Encapsulated Protection Device
(EPDK‑001)
The Encapsulated Protection Device is a 7 amp
diode suitable for 12 and 24 volt applications. It is
totally encapsulated, with sealed connections and will
work inambient temperatures up to 85°C.
It has been designed to fit in the trailer stop lamp feed to
support the installation of Tow-Pro brake controllers on
vehicles where ‘back-feed’ of 12 volts (during Tow-Pro
Manual Override) may interfere with the vehicle systems.
When installed correctly, the EPDK-001 ensures correct
trailer braking and stop lamp operation when the brakes or
Tow-Pro manual override is used.
6589-200323
Tow‑Pro Elite Switch Inserts (TPSI‑00X)
Vehicle Single unit Bulk pack (ten)
Universal model TPSI-001 TPSI-001-B
Suitable for Toyota Hilux,
Mitsubishi Triton
TPSI-002 TPSI-002-B
Suitable for Holden Colorado TPSI-003 TPSI-003-B
Suitable for Isuzu D-MAX SX TPSI-005 TPSI-005-B
Suitable for Isuzu D-MAX LS/
MU-X
TPSI-006 TPSI-006-B
Suitable for 70 Series Toyota, TPSI-007 TPSI-007-B
Suitable for Nissan Pathfinder
R52 (2013 -) and Mercedes-
Benz X Class (2018 -)
TPSI-008* TPSI-008-B*
Suitable for Mazda BT50 TPSI-009* TPSI-009-B*
*Suitable for EBRH-ACCV3 installations only
TPSI-001 TPSI-002 TPSI-003 TPSI-005
TPSI-006 TPSI-007 TPSI-008 TPSI-009
A Tow-Pro Elite Switch Insert aids in the installation of the
remote head into vehicles. It allows the installer to create
an OE-looking remote head mount whilst still maintaining
ADR21 compliance (when correctly fitted). REDARC also
offer Tow-Pro Switch Inserts in bulk packs of ten.
Tow‑Pro Elite Mounting Kit (EBMK‑001)
The Tow-Pro Elite Mounting Kit simplifies
installation of the Tow-Pro Elite main
unit under the dash of a vehicle.
It is designed to be fastened to the main unit with two
M4 bolts at right angles, in-line or diagonally across the
mainunit.
It also features an M6 slot and nut/bolt allowing connection
to the vehicle on a suitable M6 stud or M6 hole.
Tow‑Pro Remote Head Wiring Kits
(RHWK‑00X)
The Remote Head Wiring Kits are
a range of one to six metre cables
that connect the remote
head to the main unit.
These automotive-style
connectors increase
the flexibility of the
Tow-ProElite installation.
Length Product code
1 metre RHWK-001
2 metres RHWK-002
3 metres RHWK-003
4 metres RHWK-004
5 metres RHWK-005
6 metres RHWK-006
Description Product code
Tow-Pro Elite Mounting Kit EBMK-001