User Manual

Parts Supplied

Safety Notes

General Notes

Suitable for: Amarok Utility

FI13205

Issue: 4 Date: 14/08/2018

Kit Part No: TPWKIT-010

•

Read through the fitting instructions before installation of the accessory. Install the accessory following the fitting

instructions. Failure to do so may cause damage to the vehicle or the accessory.

Ensure all recyclables, discarded vehicle accessory components and packaging are recycled following local recycling

regulations.

It is always recommended that this accessory is fitted by a qualified automotive Technician.

Safely store and protect any removed vehicle components.

Ensure all bare metal surfaces are protected using automotive bare metal primer and touch-up paint, or suitable

automotive rust inhibitor.

Remove all metal swarf and dust from all vehicle surfaces if surfaces are used for accessory installation.

•

Check that all work practices comply with safety standards.

Please wear appropriate clothing and use safety equipment.

Harness x1

D E

B C

Cat-5 Cable x1

M4 Nyloc Nut x4

M8 Nyloc Nut x2

Page 02 of

Bracket x1

M4 Flat Washer x4

4-Way Connector x1

M4x10mm Pan Head

Screw x4

M8 Flat Washer x2

M8x12mm Hex Head

Bolt x2

Fitting Instructions x1

Ø6x25mm Black

Heatsink x1

Edge Clip Cable Tie x1

Cable Tie

200mmx10

900mmx15

Template x1

Ø25mm

Butt Splice x1

Universal Fascia x1