User Manual

Suitable for: MITSUBISHI PAJERO
FI12045
Issue: 2 Date: 24/05/2018
© 2018
Kit Part No: TPWKIT-009
Page 14 of
Step 28
Step 29
Step 30
The following step is for vehicle’s without a 3-way present.
• If a connector is not present, then use the supplied connector.
Using a jeweller’s flat head screw driver, disengage the 3-way
connector’s secondary lock. Ensure the secondary lock is not
removed from the connector.
• House the blue and red wires on the kick panel harness (1) in the
following orientation.
• Connect the supplied connector to the vehicle connector (2).
• Re-engage the 3-way connector secondary lock.
Terminal No. Colour
1 BLUE
2 -
3
RED
2
1
The following step is for vehicle’s with a 4-way connector occupied.
• Disconnect the 4-way connectors.
• Using a jeweller’s flat head screw driver, disengage the 4-way
connector’s secondary lock. Ensure the secondary lock is not
removed from the connector.
• House the black wire (1) into the mating connector (2) on the kick
panel harness (3) then re-engage the 4-way connector
secondary lock.
• Connect the mating connector (2) back to the vehicle.
Terminal No. Colour
1
2
3
BLACK
4
-
-
OCCUPIED
3
The following step is for vehicle’s without a 4-way present.
• If a connector is not present, then use the supplied connector.
Using a jeweller’s flat head screw driver, disengage the 4-way
connector’s secondary lock. Ensure the secondary lock is not
removed from the connector.
• House the black wire on the kick panel harness (1) in the following
orientation.
• Re-engage the 3-way connector secondary lock.
• Connect the supplied connector to the vehicle connector (2).
Terminal No. Colour
1
2
3
BLACK
4
-
-
OCCUPIED
1
1
2
2
Rear of Connector
1
3
Rear of Connector
1
2
3
4
Rear of Connector
1
2
3
4
17