User Manual

Step 16

• Cut an incision into the insulation foam (1) that is behind the

previously removed grommet.

• Route the Electric Brake Harness (1) from the battery to the interior

through the grommet hole as shown.

• Secure the Electric Brake Harness (1) using the supplied Cable Ties.

• Remove the battery positive terminal cover (1).

• Fasten the positive ring terminal (2) from the Electric Brake Harness

to the positive battery terminal.

• Refit the battery positive terminal cover (1).

• Fasten the negative terminal (3) from the Electric Brake Harness to

the vehicle ground point (4).

Ensure the grommet is seated properly.

Step 17

Step 18

Page 09 of

Suitable for: Nissan Navara NP300

FI11928

Issue: 3 Date: 14/08/2018

Kit Part No: TPWKIT-008